Rohde & Schwarz SML03 Signal generator 9 kHz – 3.3 GHz, AM/FM/PHIM (P/N 1090.3000.13)

The R&S SML Series combines all the characteristics of a general purpose signal generator – wide frequency ranges, extensive analog modulation capabilities and high reliability – into a lightweight, low-cost product.Thanks to its low phase noise SML is ideally suited to replace Los, and with precise DC-coupled FM modulation the SML can be used as an accurate VCO. The SML in conjunction with the optional Pulse Modulator SML-B3 handles all analog types of modulation. AM, FM/phase and pulse modulation can be used simultaneously. TDMA signals or amplitude variations at FM, for example, can thus be simulated. The SML has plenty of power in reserve so level loss produced by the test setup can be easily compensated. Its high output level makes SML an ideal source for driving high-level mixers. Production test systems, in which the signal is taken to the DUT via switches and cables, cause level losses which can be easily compensated by the high output power of SML.Sensitivity measurements require a signal generator with high level accuracy. This is particularly true at low output levels. With its sophisticated calibration technique, SML features high level accuracy (error <0.5 dB at levels >-120 dBm). Squelch measurements call for continuous level setting. Non-interrupting level variation by typically 30 dB makes SML the ideal choice for squelch measurements. Protection against overvoltage – The integrated overvoltage protection of SML protects against very high external voltages as they may occur during transceiver measurements.The SML Series provides high accuracy and fast settling. In production testing, compliance with specified tolerances is checked. The tolerance range is further limited by the inaccuracy of the measuring equipment used. Thanks to its high level accuracy of <0.5 dB (at levels >-120 dBm) SML reduces the accuracy requirements made on the DUT. This results in higher yield. Speed is of prime importance in production. And this is exactly one of the strong points of SML, with a setting time <10 ms for frequency and level.Simultaneous modulation – TDMA signals can be simulated since SML offers simultaneous AM, FM/phase and pulse modulation. SML is suitable, for example, for measurements in line with standards ENV 50204 (test of immunity to high-frequency electro-magnetic fields of digital radio telephones) and MIL-STD-462D (measurement of electromagnetic interference characteristics).

Features

• 9 kHz to 1.1 / 2.2 / 3.3 GHz (3 models)
• 0.1 Hz frequency resolution
• -140 dBm to +13 dBm (+19 dBm overrange)
• SSB phase noise <-122 dBc/Hz (at f = 1 GHz, Delta f = 20 kHz)
• Setting times <10 ms
• High level accuracy (<0.5 dB at levels >-120 dBm)
• High reliability through electronic attenuator
• Digital frequency and level sweep
• AM/FM/Phase Modulation
• Broadband I/Q Modulation capability (SMV03 only)
• Optional pulse modulator with integrated pulse generator
• 3-year calibration cycle
• GPIB and RS-232 interface

Supplied with:

• Front Rear Cover
• Operating Manual
• Power Cord