BimmerCode for BMW and Mini – BMW 5 Series, M5
-
LED conversion Brake Force Display
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Nội Dung Chính
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion bi-xenon
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion brake light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion center brake light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion daytime running lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion fog lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion front turn signal
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion high beam
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion inner tail lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion license plate light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion low beam
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion outer tail lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion position lights
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion rear fog light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion rear turn signals
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion reversing light
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion side turn signal
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
-
LED conversion sidemarkers
Activate this function when the lamps for the corresponding lights have been replaced with LEDs in order to prevent errors in the vehicle from being displayed and the LEDs from flickering. Use a backup to revert this coding once it has been applied.
Values:
- Active
Requirements:
- “Body Domain Controller” BDC_BODY2 control unit
- This coding is only possible with one of the OBD adapters listed here.
