Audio-Technica AT-LP60XBT-RD Fully Automatic Wireless Belt-Drive Turntable (Red)

Cut the cord, keep the vinyl. The AT-LP60XBT gives you all
the great features of the redesigned AT-LP60X fully automatic belt-drive stereo
turntable with the added convenience of Bluetooth® wireless connectivity. So
you can set up your turntable in one room and listen to it in another without
having to run a bunch of cables. 

The turntable pairs with speakers, headphones or other
wireless devices. With its CSR BT chipset, the turntable is even able to
connect to devices that support the aptX codec, which offers much-improved
sound quality over the standard SBC codec. 

Of course, the AT-LP60XBT can also be operated just like a
regular turntable with a traditional wired connection. Either way – wired or
wireless – you get outstanding audio with the ease of automatic operation
controlled by front-panel start, stop and tonearm lift buttons. 

Audio-Technica has been a leader in phono cartridge design
for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual
Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the
headshell for assured performance and ease of setup. 

The AT-LP60XBT plays both 33-1/3 and 45 RPM records and
comes with a 45 RPM adapter, a detachable dual RCA output cable (for wired
connection) and a removable hinged dust cover. The turntable is available in
black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black
(AT-LP60XBT-RD).

• High-fidelity
  audio with Bluetooth wireless technology

• Connects
  wirelessly to speakers and other devices equipped with Bluetooth wireless
  technology or to wired audio systems and powered speakers via included
  dual RCA output cable

• Compatible
  with aptX codec

• Fully
  automatic operation with two speeds: 33-1/3 and 45 RPM

• Anti-resonance,
  die-cast aluminum platter

• Redesigned
  tonearm base and headshell for improved tracking and reduced resonance

• Integral
  Dual Moving Magnet™ phono cartridge with replaceable diamond stylus
  (ATN3600L)

• AC
  adapter handles AC/DC conversion outside of the chassis, reducing noise in
  the signal chain

• Built-in
  switchable phono pre-amplifier for phono- or line-level output

• Includes:
  detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM
  adapter, and removable hinged dust cover

• Available
  in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black
  (AT-LP60XBT-RD)

Type

Belt drive turntable, fully automatic

Motor

DC servo-controlled

Speeds

33-1/3 RPM, 45 RPM

Turntable Platter

Aluminum

Wow and Flutter

Less than 0.25% (WTD) @ 3 kHz

Signal-to-Noise Ratio

>50 dB (DIN-B)

Output Level

Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec 
Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec

Phono Pre-Amp Gain

36 dB nominal, RIAA equalized

Power Supply Requirements

100 to 240V, 50/60 Hz,0.6 A Max.

Power Consumption

1.5 W

Dimensions

359.5 mm (14.15″) W x 97.5 mm (3.84″) H x 373.3
mm (14.70″) D

Weight

2.6 kg (5.73 lbs.)

Accessories Included

Dust cover, felt mat, platter (with drive belt), 45 RPM
adapter, RCA audio cable (approx. 1.2 m (3.9′)), AC adapter (approx. 1.5 m
(4.9′))

AC adapter: 

12 V, 2 A 
Replacement Stylus: ATN3600L 
Communication System: Bluetooth Version 5.0 
Maximum Communication Range: Line of sight – approx. 10 m
(33′) 
Compatible Bluetooth Profile: A2DP 
Support Codec: SBC, Qualcomm aptX