2020 BMW 7 Series 30Ld four-door sedan Specifications

The 2020 BMW 7 Series 30Ld is a rear wheel drive four-door sedan that was released to the Australian market on 01/03/2020 classified as a G12. The 7 Series is regarded as an upper large car built in Germany with prices from a dealer as a used car starting at $0.

The 7 Series is a rear wheel drive 4 door with 5 seats, powered by a 3.0L DIESEL TURBO 6 engine that has 195 kW of power (at 4000 rpm) and 620 Nm of torque (at 2000 rpm) via an Eight-speed Automatic. BMW claims the 7 Series 30Ld uses 5.1L/100km of Diesel in the combined city and highway cycle while putting out 134g of CO2. It has a 78L fuel tank, meaning it should be able to travel 1529km per full tank.

The 7 Series measures 1479mm (58.2 inches) in height, 5238mm (206.2 inches) in length, 1902mm (74.9 inches) in width with a 3210mm (126.4 inches) wheelbase that brings about a total of 2490kg (5489.5 lbs) of unladen weight. The 7 Series 30Ld comes standard with 225/60 R17 front tyres and 225/60 R17 rear tyres. It requires a service every 12 months or 20,000 km, whichever comes first. It has a 36 month, unlimited kilometre warranty.

The 2020 BMW 7 Series 30Ld has a 135mm ground clearance with a 2100kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 2.563.

The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WBA7V220%0BP57568.